 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FDC697P January 2004 FDC697P P-Channel 1.8V PowerTrench MOSFET General Description This P-Channel 1.8V specified MOSFET uses Fairchild's advanced low voltage Power Trench process. It has been optimized for battery power management applications. Features * -8 A, -20 V RDS(ON) = 20 m @ VGS = -4.5 V RDS(ON) = 25 m @ VGS = -2.5 V RDS(ON) = 35 m @ VGS = -1.8 V Applications * * * Battery management Load Switch Battery protection * High performance trench technology for extremely low RDS(ON) * Fast switching speed * FLMP SuperSOT-6 package: Enhanced thermal performance in industry-standard package size G S S S SuperSOT-6 TM 1 S 6 5 Bottom Drain 2 3 4 S FLMP Absolute Maximum Ratings Symbol VDSS VGSS ID PD TJ, TSTG Drain-Source Voltage Gate-Source Voltage Drain Current - Continuous - Pulsed Power Dissipation TA=25oC unless otherwise noted Parameter Ratings -20 8 (Note 1a) Units V V A W C -8 -40 2 1.5 -55 to +150 (Note 1a) (Note 1b) Operating and Storage Junction Temperature Range Thermal Characteristics RJA RJC Thermal Resistance, Junction-to-Ambient Thermal Resistance, Junction-to-Case (Note 1a) (Note 1b) 60 111 0.5 C/W Package Marking and Ordering Information Device Marking .697 Device FDC697P Reel Size 7'' Tape width 8mm Quantity 3000 units 2004 Fairchild Semiconductor Corporation FDC697P Rev C2 (W) FDC697P Electrical Characteristics Symbol BVDSS BVDSS TJ IDSS IGSS VGS(th) VGS(th) TJ RDS(on) TA = 25C unless otherwise noted Parameter Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate-Body Leakage (Note 2) Test Conditions VGS = 0 V, ID = -250 A Min -20 Typ Max Units V Off Characteristics ID = - 250 A, Referenced to 25C VDS = -16 V, VGS = 8 V, VGS = 0 V VDS = 0 V -0.4 -0.8 2.9 13 18 26 16 37 20 25 35 27 -12.2 -1 100 -1.5 mV/C A nA On Characteristics Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance ID = -250 A VDS = VGS, ID = - 250 A, Referenced to 25C VGS = -4.5 V, ID = -8 A ID = -6.8 A VGS = -2.5 V, VGS = -1.8 V, ID = -5.8 A VGS = -4.5 V, ID = -8 A, TJ =125C VDS = -5 V, ID = -8 A V mV/C m gFS Ciss Coss Crss RG td(on) tr td(off) tf Qg Qgs Qgd IS VSD trr Qrr Notes: 1. Forward Transconductance S Dynamic Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate Resistance (Note 2) VDS = - 10 V, f = 1.0 MHz VGS = 15 mV, VDD = -10 V, VGS = -4.5 V, V GS = 0 V, 3524 544 254 pF pF pF 32 12 190 69 55 8.4 7.8 ns ns ns ns nC nC nC f = 1.0 MHz ID = -1 A, RGEN = 6 3.8 Switching Characteristics Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge 18 6 119 43 VDS = -10 V, VGS = -4.5 V ID = -8 A, 39 6 5.6 Drain-Source Diode Characteristics and Maximum Ratings Maximum Continuous Drain-Source Diode Forward Current Drain-Source Diode Forward VGS = 0 V, IS = -1.6 A Voltage Reverse Recovery Time IF = -8 A, diF/dt = 100 A/s Reverse Recovery Charge -1.6 (Note 2) A V ns nC -0.7 27 16 -1.2 RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 60C/W when 2 mounted on a 1in pad of 2 oz copper b) 111C/W when mounted on a minimum pad of 2 oz copper Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% FDC697P Rev C2 (W) FDC697P Dimensional Outline and Pad Layout Bottom View Top View Recommended Landing Pattern FDC697P Rev C2 (W) FDC697P Typical Characteristics 40 VGS = -4.5V -3V -2.5V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 3 -ID, DRAIN CURRENT (A) 30 2.5 VGS = -1.8V 20 -1.8V 10 2 1.5 -2.5V -3.0V -3.5V -4.5V 1 0 0 0.5 1 1.5 2 -VDS, DRAIN-SOURCE VOLTAGE (V) 0.5 0 10 20 -ID, DRAIN CURRENT (A) 30 40 Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 0.05 RDS(ON), ON-RESISTANCE (OHM) 1.4 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID = -8A VGS = -4.5V 1.2 0.045 0.04 0.035 0.03 0.025 0.02 0.015 0.01 0.005 1 2 3 TA = 25oC TA = 125oC ID = -4 A 1 0.8 -50 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (oC) 4 5 -VGS, GATE TO SOURCE VOLTAGE (V) Figure 3. On-Resistance Variation withTemperature. 40 VDS = -5V -IS, REVERSE DRAIN CURRENT (A) Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 10 VGS = 0V 1 TA = 125 C 25 C o o -ID, DRAIN CURRENT (A) 30 0.1 20 TA = 125oC 0.01 -55oC 10 25oC -55oC 0.001 0.0001 0 0.5 1 1.5 2 2.5 -VGS, GATE TO SOURCE VOLTAGE (V) 0 0.2 0.4 0.6 0.8 1 1.2 -VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 5. Transfer Characteristics. Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDC697P Rev C2 (W) FDC697P Typical Characteristics 5 -VGS, GATE-SOURCE VOLTAGE (V) ID = -8A 4 CAPACITANCE (pF) -15V 3 VDS = -5V -10V 5000 4500 4000 3500 3000 2500 2000 1500 1000 500 CRSS 0.0 5.0 10.0 15.0 20.0 COSS CISS f = 1MHz VGS = 0 V 2 1 0 0 10 20 30 40 50 Qg, GATE CHARGE (nC) 0 -VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 7. Gate Charge Characteristics. 100 P(pk), PEAK TRANSIENT POWER (W) 50 Figure 8. Capacitance Characteristics. RDS(ON) LIMIT 1ms -ID, DRAIN CURRENT (A) 10 100ms 1s 1 10s DC VGS = -4.5V SINGLE PULSE o RJA = 100 C/W TA = 25oC 0.01 0.1 1 10 -VDS, DRAIN-SOURCE VOLTAGE (V) 100 10ms 40 SINGLE PULSE RJA = 100C/W TA = 25C 30 20 0.1 10 0 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 9. Maximum Safe Operating Area. Figure 10. Single Pulse Maximum Power Dissipation. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 1 D = 0.5 0.2 0.1 RJA(t) = r(t) * RJA RJA = 100 C/W P(pk) t1 t2 T J - T A = P * R JA (t) Duty Cycle, D = t 1 / t2 0.1 0.05 0.02 0.01 0.01 SINGLE PULSE 0.001 0.001 0.01 0.1 1 t1, TIME (sec) 10 100 1000 Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1b. Transient thermal response will change depending on the circuit board design. FDC697P Rev C2 (W) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FACT Quiet SeriesTM ActiveArrayTM FAST BottomlessTM FASTrTM CoolFETTM FPSTM CROSSVOLTTM FRFETTM DOMETM GlobalOptoisolatorTM EcoSPARKTM GTOTM E2CMOSTM HiSeCTM EnSignaTM I2CTM FACTTM ImpliedDisconnectTM Across the board. Around the world.TM The Power FranchiseTM Programmable Active DroopTM DISCLAIMER ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM OPTOLOGIC OPTOPLANARTM PACMANTM POPTM Power247TM PowerTrench QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SILENT SWITCHER SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET VCXTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I7 |
Price & Availability of FDC697P
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |